TM 9-2330-247-14&P
4-36. WHEEL CYLINDERS (Con't)
ACTION
ITEM
LOCATION
REMARKS
INSTALLATION
Tee fitting
9.
a. Put gasket (15) on fluid passage bolt (16).
Gasket (13),
(11) and middle
b. Put middle fitting (14), gasket (13), and tee fitting
gasket (15), and
fitting (14)
fluid passage
(11) in place.
bolt (16)
c. Screw in and tighten fluid passage bolt (16)
in. box-end wrench.
using
Middle fitting (14)
Nut (18) and
10.
in. open-end box
Screw in and tighten using
wrench and adjustable wrench.
gasket (17)
Tee fitting
Put in place.
11.
Tube (9)
(11) and
top fitting (7)
Tube (9), tee
12.
a. Screw in and tighten using
in. open-end
Two nuts (19)
fitting (11), and
box wrench and adjustable wrench.
top fitting (7)
b. Repeat steps 11 and 12a for tube (12).
Top wheel
13.
Bleeder screw
in. box-end wrench.
Screw in and tighten using
cylinder (20)
(10)
Top fitting (7)
14.
a. Put gasket (6) on fluid passage bolt (5).
Gasket (6),
and top wheel
gasket (8), and
b. Put gasket (8) and top fitting (7) in place.
cylinder (20)
fluid passage
bolt (5)
Put in place.
Backing plate (2)
15.
Shield (1) and
top wheel
cylinder (20)
Two screws (4)
Backing plate (2),
16.
Screw in part way.
shield (1),
and Iockwashers
and top wheel
(3)
cylinder (20)
Fluid passage
Top fitting (7)
17.
Screw in and tighten using
in. box-end wrench.
and top wheel
bolt (5)
cylinder (20)
in. box-end wrench.
Backing plate (2),
Two screws (4)
a. Tighten using
18.
shield (1), and top
b. Repeat steps 13 through 18a for lower wheel
and Iockwashers
cylinder.
wheel cylinder (20)
(3)
FOLLOW-ON MAINTENANCE:
TASK ENDS HERE
4-73