TM 9-2330-247-14&P
HYDRAULIC TUBES AND FlTTINGS
This Task Covers:
b. Installation
Removal
a.
Initial Setup:
Materials/Parts:
Equipment Conditions:
Pressure tank drained (para 3-9).
Rags (Item 11, Appendix E)
Tools/Test Equipment:
Pan, drain
Pliers, round-nose, long
Screwdriver, cross-tip, no. 2
Wrench, open-end, in.
Wrench, open-end box,
in.
Wrench, open-end box, in.
Wrench, open-end box,
in.
ACTION
ITEM
REMARKS
LOCATION
NOTE
This procedure Is for hydraulic tubes on left side of trailer. Procedure for right side is
similar; repeat as required.
REMOVAL
NOTE
Have drain pan ready to catch brake fluid spillage.
a. Place drain pan under fittings to catch spillage.
1.
Nut (1)
Straight adapter
b. Using in. and
in. open-end box wrenches,
(27) and
unscrew nut (1) from straight adapter (27).
hydraulic tube (2)
Hydraulic tube
Nut (5)
Using
in. open-end box wrench, unscrew.
2.
(2) and tee
fitting (6)
a. Using long round-nose pliers, pull up and out of
Frame (3) and
Grommet (4)
3.
frame (3).
hydraulic
b. Slip off hydraulic tube (2).
tube (2)
Pull out.
Hydraulic tube (2)
Frame (3)
4.
Using
in. and
in. open-end box wrenches,
Two nuts (7)
Tee fitting
5.
unscrew.
(6), hydraulic
tube (9), and
hydraulic tube (8)
