TM 9-2330-247-14&P
WHEEL CYLINDERS
This Task Covers:
b. Installation
Removal
a.
Initial Setup:
Materials/Parts:
Equipment Conditions:
Brakeshoes removed (para 4-32).
Rags (Item 11, Appendix E)
Tools/Test Equipment:
Pan, drain
Wrench, box-end,
in.
Wrench, box-end, in.
Wrench, box-end, in.
Wrench, open-end, adjustable, 12 in.
Wrench, open-end, box,
in.
Wrench, open-end, box, in.
ACTION
REMARKS
ITEM
LOCATION
NOTE
Both sets of wheel cylinders are replaced In the same way. This procedure is for one set
of wheel cylinders; repeat for the other set.
REMOVAL
NOTE
Have drain pan ready to catch brake fluid spillage.
a. Place drain pan under.
Fluid passage bolt
1.
Top fitting (7)
b. Using
in. box-end wrench, unscrew and
and top wheel
(5), gasket (6),
take off.
and gasket (8)
cylinder (20)