TM 9-2330-285-14&P/TO 36A11-21-10-1
COMMERCIAL STOPLIGHT
This task covers:
a. Lamp and lens removal (page 4-36)
b. Cleaning and inspection (page 4-36)
c. Lamp and lens installation (page 4-37)
INITIAL SETUP
Materials/Parts
Tools
New packing (if required)
Cross-tip screwdriver
New lamps (if required)
Sandpaper, 00
ACTION
REMARKS
ITEM
LOCATION
LAMP AND LENS REMOVAL
Take off using a cross-tip screwdriver.
1 Lens (1) to
Four screws (3),
housing (2)
gasket (4) and
lens (1)
Take out by pushing in and turning counter-
2 Housing (2)
Lamp (5)
clockwise.
CLEANING AND INSPECTION
Inspect for damage.
3
Gasket (4)
Throw away gasket if damaged.
Inspect for corrosion.
Socket (6)
4
If socket is corroded, clean with 00
sandpaper.
Test lamp using a multimeter (page 4-58).
Lamp (5)
5
Throw away lamp if bad.
