TM 9-2330-285-14&P/TO 36A11-21-10-1
HUB AND BRAKE DRUM - CONTINUED
ACTION
REMARKS
ITEM
LOCATION
ASSEMBLY - CONTINUED
RESURFACING
5 Brake drum (1)
Inner braking
a. Inspect for scoring, cracks or heat
surface (2)
checking.
Any drums which are cracked or heat
checked must be replaced.
b. Check diameter using inside micrometer.
Take measurements every 45. Runout
may not exceed .006 inch (.1588 mm).
Drums exceeding runout limits must be
"trued" on lathe. Drums which exceed
11.060 inches In diameter at any point
must be replaced.
TASK ENDS HERE
