TM 9-2330-285-14&P/TO 36A11-21-10-1
S e c t i o n IV HUB AND BRAKE DRUM MAINTENANCE
Page
5-8
Hub and Brake Drum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HUB AND BRAKE DRUM
This task covers:
a. Disassembly (page 5-8)
b. Assembly (page 5-8)
c. Resurfacing (page 5-9)
INITIAL SETUP
Materials/Parts
Tools
New studs- five per wheel
Arbor press
Emery cloth
Stud removal and installation
fixtures
Equipment Condition
Inside micrometer (11 - 12 inch)
Hub and drum removed (page 4-132).
ACTION
REMARKS
ITEM
LOCATION
DISASSEMBLY
WARNING
The hub and brake drum assembly will be full of asbestos dust
from the brake linings. Breathing asbestos dust is extremely
hazardous. A filter mask should be worn whenever working on
the hub and brake drum assembly.
Remove using arbor press and stud fixtures.
Five studs (3)
1 Hub (1) to
Throw away studs (3).
brake drum (2)
Remove.
Brake drum (2)
2 Hub (1)
ASSEMBLY
Place in position.
Brake drum (2)
3 Hub (1)
Aline stud holes.
Install using arbor press and stud fixtures.
Five new studs (3)
4 Hub (1) to
brake drum (2)
