TM 9-2330-287-14&P
ORGANIZATIONAL PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)
S-SEMIANNUALLY
A-ANNUALLY
INTERVAL
ITEM TO BE INSPECTED
ITEM
PROCEDURE: CHECK FOR AND HAVE REPAIRED, FILLED,
NO.
S
A
REPLACED, OR ADJUSTED AS NEEDED
NOTE
Perform operator/crew PMCS prior to, or in conjunction with, organi-
zational PMCS.
1.
FRAME
Look for cracks, bent members, or broken welds.
2.
BRAKE MASTER CYLINDER
Check fluid level in master cylinder. Fill to 1/2 inch from top.
3.
WHEEL BEARINGS
a. Remove wheel hubs and bearing cones (page 4-87).
b. Clean, inspect, and repack wheel bearings.
4.
SERVICE BRAKES
a. Clean (page 4-14), inspect, and repair or replace (page 4-46) internal
brake parts as required.
b. Adjust service brakes (page 4-50).
5.
WHEELS AND TIRES
a. Using a torque wrench, tighten wheel nuts to 450 - 500 ft lb
(610 678 Nm).
b. Check tread depth of tires.
6.
SUSPENSION
Check suspension for bent or cracked parts, loose mounting, and worn
bushings.
