TM 9-2330-287-14&P
SERVICE BRAKE
This task covers:
INITIAL SETUP
Tools - Continued
Tools
Socket, 9/16- by 3/8-inch square drive
Extension, 6-by 3/8-inch square
Wrench, open-end, 9/16-inch
drive
Handle, reversible, 3/8-inch square
Equipment Condition
drive
Pliers, brake-repair
Pliers, needle-nose
Socket, 7/16- by 3/8-inch square
drive
ACTION
ITEM
REMARKS
LOCATION
DISASSEMBLY
Two springs (5)
Using brake-repair pliers, remove.
1. Pins (1,2,3,
and 4)
Handbrake cable (7)
2. Brake lever (6)
Unhook.
Two clips (8), two
3. Pins (1 and 4)
Using needle-nose pliers, remove.
flat washers (9), and
two wave washers (10)
Brake lever (6)
Slide off.
4. Pin (1)
Strut (11)
Slide off.
5. Pin (4)
Capscrew (13), lock-
Using 7/16-inch socket and handle,
6. Brakeshoe(12)
washer (14), flat
remove.
washer (15), and
sleeve (16)
Nut (18), Iockwasher
Using 7/16-inch socket and handle,
7. Brakeshoe (17)
(19), flat washer
remove.
(20), sleeve (21),
and bolt (22)