TM 9-2330-287-14&P
TRUNNION AXLE - CONTINUED
ACTION
REMARKS
ITEM
LOCATION
REMOVAL CONTINUED
Trunnion axle (2)
With the help of an assistant, using hy-
Axle mount (1)
6.
draulic jack (3), lower and remove.
Two capscrews (5)
Using 7/16-inch socket-head wrench,
7.
Lockring (4)
remove.
Lockring (4)
Remove.
Trunnion axle,
8.
left side (2)
Axle bracket (6)
Slide off.
9.
and two spacers (7)
NOTE
Repeat steps 7 thru 9 for opposite side.
INSTALLATION
Axle bracket (6)
Slide into position.
10.
Trunnion axle,
and two spacers (7)
left side (2)
Lockring (4)
Place in position.
11.
Two capscrews (5)
Using 7/16-inch socket-head wrench,
12.
Lockring (4)
install.
NOTE
Repeat steps 10 thru 12 for opposite side.
Trunnion axle,
With the help of an assistant, using a
Axle mount (1)
13.
left side (2)
hydraulic jack (3), raise into position.
Plate (9)
Place in position.
14.
Four bolts (8)
Four locknuts (10)
Using 1 1/8-inch open-end wrench, 1 1/8-
15.
and four nuts (11)
inch socket, and handle, install.
NOTE
Repeat steps 13 thru 15 for opposite side.