TM 9-2330-287-14&P
WHEEL AXLE - CONTINUED
NOTE
FOLLOW-ON MAINTENANCE:
1.
2.
Install brake line; left service brake to axle tee (page 4-57).
3.
Install brake Iine right service brake to axle tee (page 4-57).
4.
TASK ENDS HERE
TRUNNION AXLE
This task covers:
INITIAL SETUP
Tools - Continued
Tools
Wrench, open-end, 15/16-inch
Jack, hydraulic
Wrench, open-end, 1 1/8-inch
Handle, reversible, 1/2-inch
Wrench, socket-head, 7/16-inch
square drive
Socket, 15/16- by 1/2-inch square
Personnel Required
drive
Socket, 1 1/8-by 112-inch square
Two
drive
Stand, jack (two required)
ACTION
ITEM
REMARKS
LOCATION
REMOVAL
Hydraulic jack (2)
Trunnion axle,
Lift so that wheels support no weight,
1.
left side (1)
but still touch ground.
2.
Jack stands (4)
a. Place jack stands (4) in position.
Left frame
rail (3)
b. Lower jack (2).
Allow Jack (2) to remain supporting
trunnion axle (1).
NOTE
Repeat steps 1 and 2 for opposite side.