TM 9-2330-287-14&P
WHEEL AXLE - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
REMOVAL - CONTINUED
Place under axle (1) for support.
Hydraulic jack (2)
7.
Axle (1)
Do not remove weight of trailer from
Jack stands (3).
Four locknuts (5)
Using 15/16-inch socket and handle with
Two U-bolts (4)
8.
and four nuts (6)
1/2-inch square drive, remove.
Two U-bolts (4)
Remove.
9.
Shackle box (7)
to cover(8)
Cover (8), two nuts
Using 3/4-inch socket and handle with
10.
Shackle box (7)
(9), two Iockwashers
1/2-inch square drive, remove.
(10), and spacer (11)
NOTE
Repeat steps 5, 6, 8, 9, and 10 for opposite side.
Axle (1)
With help of an assistant, lower and
11.
Springs (12)
remove.
Two spacers (13)
Remove.
12.
Shackle box (7)
and spacer (14)
NOTE
Repeat step 12 for opposite side.
INSTALLATION
Two spacers (13)
13.
Place in position.
Shackle box (7)
and spacer (14)
NOTE
Repeat step 13 for opposite side.
Axle (1)
Using hydraulic jack (2), place in
14.
Spring (12)
position.
15.
Cover (8), two nuts
Using 3/4-inch socket and handle with
Shackle box (7)
(9), two Iockwashers
1/2-inch square drive, install.
(10), and spacer (11)