TM 9-2330-287-14&P
REFLECTORS - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
REMOVAL
Two screws (2) and
Using screwdriver, remove.
1. Frame (1)
reflector (3)
INSTALLATION
Reflector (3)
Position red reflector (3) at rear of
2. Frame (1)
trailer and yellow reflector (3) at front
of trailer.
Two screws (2)
Using screwdriver, install.
3. Reflector(3)
TASK ENDS HERE
PLATE, VEHICLE DATA
This task covers:
a. Removal (page 4-108)
b. Installation (page 4-108)
INITIAL SETUP
Materials/Parts
Tools
Drivescrews (as required)
Drill, bit, twist, 3/8-inch
Drill, electric, portable, 1/2-inch size
Hammer, ball-peen
Punch
Screwdriver, flat-tip
TA224835
