TM 9-2330-294-14
Figure 4-9. Composite stoplight- taillight exploded view.
wiring harness ground lead terminal and harness,
4-20. Retractable Clearance Light Housing
Assembly Replacement
(3) Remove two screws, lock washers and
washers from rear of housing assembly.
(4) Loosen clamp lever on frame bracket and
a. Removal.
pull housing assembly from bracket.
(1) Disconnect clearance light wiring harness
b. Installation. Install new or repaired clearance
electrical connector(s) at main wiring harness
light housing assembly in reverse order of removal
connection.
(a above).
(2) Remove cap screw and lock washer securing
wiring harness clamp and disconnect clearance light