TM 9-2330-294-14
replacer (CPR 102289) with handle (7950113) to pilot
in bearing 1. D. and tap oil seal until oil seal flanges
seats on face of hub inner rim.
CAUTION
Do not tap on replacer after seal has bot-
tomed.
(4) Ensure the axle spindle is thoroughly clean
and apply a thin coat of sealer (MIL-D-45180, type
3) around wiper journal of spindle. Position wiper
and replacer (CPR 102290) on spindle, as shown in
wheel bearing adjusting nut. Wiper must be in-
stalled squarely to aline properly with inner wheel
bearing.
4-103
