TM 9-2330-294-14
Section XI. FRAME AND TOWING ATTACHMENT MAINTENANCE
4-61. Air Suspension Spring Protection Plate
b. Installation. Position plate attaching brackets
to mating bracket on frame and install retaining pin,
two washers, cotter pin, cap screw, lock washer, and
a. Removal. Remove cotter pin, two washers, and
nut. Tighten nut to 23 - 30 lb ft torque.
retaining pin. Remove cap screw, lock washer and
nut and remove protection plate.
(2) Remove ramp from trailer by removing two
retaining rings and ramp shaft.
(3) Disassemble bushing from tie down lug by
installation procedures.
removing two retaining rings.
b. Installation. Install loading ramp in the
reverse order of removal.
a. Removal.
(1) Remove two retaining rings security flap
shaft. Slide shaft out and remove flap assembly.