TM 9-2330-294-14
cap assembly from housing. Do not disassemble cap
used on semitrailer no. 1 through 200 and
assembly; refer to paragraph 6-29 below for service
those used on semitrailer no. 201 and cm are
instructions.
not interchangeable. Take care to replace
d. Remove rubber washer from housing. Discard
damaged components with correct parts.
washer.
e. Remove preformed packing and two back-up
b. Release foot set screw, unscrew foot from
rings from inside housing. Discard packing and
piston, and remove set screw, foot and preformed
back-up rings.
packing. Discard packing.
c. Remove cap assembly snap ring and separate
