TM 9-2330-297-14&P
PREPARATION FOR USE - CONTINUED
INSTALLING TANDEM BOGIE ASSEMBLY ON SEMITRAILER CHASSIS
NOTE
High density loads require a tandem bogie assembly on 20-foot semitrailer chassis.
1.
Couple towing vehicle to semitrailer chassis. See page 2-14.
2.
Apply semitrailer service brakes.
3.
Disconnect bogie airbrake hoses (1) and (2). Bogie brakes will lock.
4.
Using a 9/16-inch open-end wrench, back off handle lock screw (3).
5.
Take pull handle (4) out of top notch and push it down into bottom notch.
6. Release semitrailer service brakes. Bogie brakes will remain locked.
TA223089
2-31
