TM 9-2330-297-14&P
SERVICE BRAKE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Service brake
Return spring (1)
Using brake repair pliers, remove return
spring (1).
NOTE
If pins (4) are stuck in spider (5), use a hammer and punch to drive them out.
2.
Anchor pins (4)
a. Using retaining ring pliers, remove
retaining rings (2).
b. Remove washers (3).
c. Remove pins (4).
d. Remove brakeshoes (6).
3.
Cam rollers (7)
Using flat-tip screwdriver, unhook roller
retainer (8) and rollers (7).
NOTE
Do step 4 only if inspection shows anchor pin bushings need replacing.
4.
Axle spider
Anchor pin
Using hammer and punch, drive out
bushing (9)
bushing (9).
CLEANING
5.
Service brakes
Clean all parts in accordance with the
instructions on page 4-19.
4-52
