TM 9-2330-297-14&P
BOGIE POSITION PULL HANDLE
This task covers:
a. Removal (page 4-49)
b. Installation (page 4-49)
INITIAL SETUP
Tools
Materials/Parts
Pliers, diagonal cutting
Cotter pins
Wrench, open-end, 9116-inch
ACTION
LOCATION
ITEM
REMARKS
1.
Bogie
Pull handle (1)
a. Using 9/16-inch wrench, unscrew lock
(2) part way.
b. Unhook spring (3) from pull handle (1).
c. Using pliers, remove cotter pins (4) and
washer (5). Discard cotter pins (4).
d. Remove pull handle (1)
INSTALLATION
2.
Pull handle (1)
a. Position pull handle (1) and install
washer (5) and cotter pins (4).
b. Using pliers, bend cotter pin (4) ends.
c. Hook spring (3) to pull handle (1)
d. Using 9/16-inch wrench, tighten
lock (2)
TASK ENDS HERE
TA223138
4-49
