TM 9-2330-297-14&P
BRAKE CAMSHAFT BUSHINGS
This task covers:
a. Removal (page 4-56)
c. Inspection (page 4-57)
b. Cleaning (page 4-57)
d. Installation (page 4-58)
INITIAL SETUP
Tools
Materials/Parts
Hammer, ball-peen
Packing
Handle, reversible, 3/8-inch
square drive
Equipment Condition
Mallet, soft-face
Pliers, retaining ring
Brake camshaft removed (page 4-54).
Punch, straight, 3/4-inch
Socket, 9/16- by 3/8-inch square
drive
Wrench, box, 9/16-inch
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Camshaft sup-
Camshaft
a. Using 9/16-inch socket and 9/16-inch
port bracket
bushing (1)
box wrench, remove nuts (2), washers
(3), and capscrews (4).
b. Remove bushing retainers (5) and (6)
from support bracket (7) and separate.
c. Remove bushing (1) and packings (8)
and discard.
4-56
