TM 9-2330-297-14&P
SERVICE BRAKE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSPECTION
6.
Service brakes
a. Inspect all parts in accordance with the
instructions on page 4-20.
b Inspect brake linings for a minimum 1/8-
inch (3.2 mm) thickness and a minimum
1/16-inch (1.6 mm) rivet head depth.
INSTALLATION
7.
Axle spider
Bushing (9)
Using mallet, tap bushing (9) into
spider (5).
8.
Service brakes
Cam rollers (7)
a Position rollers (7) on brakeshoes (6).
b. Using flat-tip screwdriver, install
retainer (8)
9.
Brakeshoes (6)
a. Position brakeshoes (6) on spider (5).
b. Insert anchor pins (4) through brake-
shoes (6) and spider (5).
c. Using retaining ring pliers, install
washers (3) and retaining rings (2).
10.
Return spring (1)
Using brake repair pliers, install return
spring (1).
TA223140
4-53
