TM 9-2330-297-14&P
LANDING GEAR GEARBOX - CONTINUED
INITIAL SETUP
Tools
Tools - Continued
Hammer, ball-peen
Socket, 9/16- by 3/8-inch square drive
Handle, reversible, 3/8-inch
Socket, 314- by 3/8-inch square drive
square drive
Wrench, box, 9/16-inch
Punch, drive-pin, straight
Wrench, box, 3/4-inch
1/4-inch point
Pliers, slipjoint
Materials/Parts
Screwdriver, cross-tip
Screwdriver, flat-tip
Grease, GAA (item 6, appendix E)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Left and right
Four wheel
Place in front and back of wheels (2).
wheels
chocks (1)
2.
Jack stands (3)
Using suitable hoist, raise chassis front
and place jack stands (3) under chassis
frame (4).
3.
Crank handle (5)
a. Using 9/16-inch socket and 9/16-inch
wrench, remove nut (6), washers (7),
and bolt (8).
b. Remove handle (5).
4-92
