TM 9-2330-297-14&P
LANDING GEAR GEARBOX,- CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
4.
Connecting
Nuts (9), washers
Using 9/16-inch socket and wrench, remove
shaft
(10) and cap-
four nuts (9), washers (10), and
screws (11)
capscrews (11).
5.
Couplings (12)
Slide two couplings (12) onto connecting
and shaft (13)
shaft (13) and remove shaft (13).
6.
Left landing
Screws (14),
Using flat-tip screwdriver, remove two
gear leg
cover (15) and
screws (14) and cover (15); pry off
plug (16)
plug (16).
7.
Groove pin (17)
Using hammer and punch, remove pin (17).
8.
Gearbox (18)
a. Using 3/4-inch socket and wrench, re-
move nuts (19), washers (20), and
capscrews (21).
b. Slide gearbox (18) out off leg (22) and
remove pinion gear (23) from shaft (24).
4-93
