(5) Remove padlock. Slowly open fill cover
(b) Loading With a Hose. The loading hose
(fig. 2-20) and insert
hose far enough
to keep end
from the storage facility may have a metal fitting on the
in contact with bottom of tank.
free end, and the hose may not be bonded internally. Such
a fitting is insulated and could become charged. Before
opening fill cover, connect the vehicle bonding and
grounding cable to grounding stud (fig. 2-7) on top of tank
The capacity Indicator gage Is located Inside
and to some part of the permanent piping of the loading
(4) Remove fire extinguishers and bring them to
(6) Slowly begin flow, and fill tank no further
than to the bottom of the capacity indicator.
the point of operation.