TM 9-2330-356-14
TA099780
Composite Tall Stop Lights
(5) Inspect door and lens assembly. If damaged,
replace. Secure door and lens assembly to body assembly
with six screws.
WARNING
Removal.
b.
When troubleshooting an electrical malfunc-
tion or performing electrical maintenance,
ALWAYS disconnect intervehicular electrical
fasten cover plate to semitrailer. Remove cover plate and
cable from semitrailer, and negative battery
gasket.
cables at batteries. Failure to follow this warn-
ing may create a spark and explosion, result-
(2) Disconnect light wires from harness.
ing in serious injury or death to personnel.
(3) Remove the two capscrews and Iockwashers
a.
Lamp or Lens Replacement.
(4) Remove composite light and gasket.
fasten door and lens to body.
Installation.
c.
(2) Remove door and lens find preformed pack-
(1) Fasten composite light and gasket to cover
ing.
(3) Remove defective lamp and install a new
lamp.
(2) Connect light wires to the harness.
(4) Inspect preformed packing and replace if
(3) Install cover plate and secure with six
damaged.
self-tapping screws.