TM 9-2330-356-14
(2) Inspect camshaft for twists and bends.
c.
Installation.
(3) Inspect inner and outer retainers for bends
(1) Assemble camshaft bushing, two preformed
and cracks.
packings, and inner and outer retainers to bracket in order
shown.
(4) Inspect spider bushing and camshaft bushing
(2) Install four screws, four washes, and four
for cracks and excessive wear.
nuts to secure camshaft bushing assembly to the bracket.
Tighten four nuts.
(5) Replace all parts which are not in good
condition.
(3) Install spider bushing.
Figure 4-76. Brake Camshaft Removal and Installation (M967A1, M969A1, and M970A1 including M970 SN
TC-0843, TC-0844, and TC-103 thru TC-178).
Change 3