TM 9-2330-356-14
e. Installation. Install emergency valve to tank sump
(4) Drive out roll pin securing the lever to the
handle guard and remove lever.
b.
Assembly and Installation.
Deadman Control Valve (M970 and
M970A1) (Fig. 8-27)
(1) Aline holes in lever (fig. 8-27) and handle
guard. Drive in roll pin to secure lever.
a.
Removal and Disassembly.
(2) Thread red hose through opening in handle
(1) Pull hose reel hoses out far enough to remove
guard (fig. 5-27), and attach to OUT port of valve
deadman control.
assembly. Attach green hose to IN port of valve assembly.
(2) Remove two screws and nuts (fig. 8-27) on the
(3) Replace valve assembly in handle guard of
deadman control to free the valve assembly.
deadman control. Secure with two screws and nuts.
(3) Disconnect the two hoses from the valve
(4) Pull hoses to release latch on hose reel and
rewind the hoses.
assembly and remove valve.
TA113230
