TM 9-2330-357-14&P
4-55. FENDER REPLACEMENT (Con't).
b. CLEANING AND INSPECTION
WARNING
Dry cleaning solvent, P-D-680, Is toxic and flammable. Always wear protective
goggles and gloves, and use only In a well-ventilated area. Avoid contact with skin,
eyes, and clothes, and DO NOT breathe vapors. DO NOT use near open flame or
excessive heat. The solvent's flash point Is 100 -138 (38 -59 ). If you become
F
F
C
C
dizzy while using cleaning solvent, Immediately get fresh air and medical help. If
solvent contacts eyes, Immediately wash your eyes and get medical aid.
1. Remove all buildup of grease and dirt by using a clean rag or medium bristle brush and dry cleaning
solvent, and allow to dry.
2. Inspect for loose, missing, or damaged hardware.
3. Inspect for cracks, holes, warps, dents, and bends.
4. Inspect for rust, corrosion, or marred finish.
c. INSTALLATION
1. Install bracket (4) with three screws (6), washers (5), new lockwashers (7), and nuts (8).
2. Repeat step 1 for other bracket (4).
3. Install fender (1) with ten new lockwashers (9), screws (10), washers (2), and nuts (3). Torque screws to
30-35 Ib.-ft. (41-47 N-m).
4-114
