TM 9-2330-357-14&P
4-54. FRONT SPLASHGUARD REPLACEMENT.
This Task Covers:
a. Removal
c. Installation
b. Cleaning and Inspection
Initial Setup:
Materials/Parts:
Tools/Test Equipment:
General mechanic's tool kit
Six lockwashers
Personnel Required: Two
a. REMOVAL
retainer (2), and front splashguard (1) from fender
(6). Discard lockwashers.
b. CLEANING AND INSPECTION
1. Remove all buildup of grease or dirt using a clean
rag.
2. Wash thoroughly with detergent and water, and al-
low to dry.
3. Inspect for loose, missing, or damaged hardware.
c. INSTALLATION
Install front splashguard (1) and retainer (2) to fender (6) with six screws (3), new lockwashers (4), and nuts
(5).
TA706507
4-112