TM 9-2330-357-14&P
4-55. FENDER REPLACEMENT.
This Task Covers:
a. Removal
c. Installation
b. Cleaning and Inspection
Initial Setup:
Equipment Conditions:
Materials/Parts:
Rear splashguard removed (para 4-53).
Brush (Item 4, Appendix E)
Front splashguard removed (para 4-54).
Rags (Item 14, Appendix E)
Dry cleaning solvent (Item 16, Appendix E)
Sixteen lockwashers
Tools/Test Equipment:
General mechanic's tool kit
Common no. 1 shop set
Personnel Required: Two
a. REMOVAL
1. Remove ten nuts (3), washers (2), screws (10), lockwashers (9), and fender (1). Discard lockwashers.
2. Remove three nuts (8), lockwashers (7), washers (5), screws (6), and bracket (4). Discard lockwashers.
3. Repeat step 2 for other bracket (4).
4-113
