TM 9-2330-357-14&P
4-52. TORQUE ROD REPLACEMENT.
This Task Covers:
a. Removal
c. Installation
b. Cleaning and Inspection
Initial Setup:
Equipment Conditions:
Materials/Parts:
Bogie assembly removed by Direct Support
Brush (Item 4, Appendix E)
Rags (Item 14, Appendix E)
Maintenance.
Dry cleaning solvent (Item 16, Appendix E)
Two cotter pins
Tools/Test Equipment:
General mechanic's tool kit
Common no. 1 shop set
Personnel Required: Two
a. REMOVAL
NOTE
Upper torque rods cannot be removed unless bogie assembly Is removed by Direct Support
Maintenance to provide access.
1. Remove two cotter pins (2) and castellated nuts
(1). Discard cotter pins.
2. Remove torque rod (3).
3. Repeat steps 1 and 2 for other five torque rods
(3).
4-108
