TM 9-2330-357-14&P
5-13. SPRING MAINTENANCE (Con't).
b.
DISASSEMBLY
1.
Remove two alinement cli ps (7) from springs
(3).
2.
Remove two screws (14), spacers (13), nuts
(10), and alinement clips (8).
3.
Remove bolt (12) and nut (9).
4.
Separate individual spring leaves (11) as
necessary.
c.
CLEANING AND INSPECTION
WARNING
Dry cleaning solvent, P-D-680, is toxic and flammable. Always wear protective
goggles and gloves, and use only in a well-ventilated area. Avoid contact with
skin, eyes, and clothes, and DO NOT breathe vapors. DO NOT use near open
flame or excessive heat. The solvent's flash point Is 100 -138 (38 -59 ). If
F
F
C
C
you become dizzy while using cleaning solvent, Immediately get fresh air and
medical help. If solvent contacts eyes, immediately wash your eyes and get
medical aid.
1.
Remove all buildup of grease or dirt by using a clean rag or medium bristle brush and dry cleaning
solvent, and allow to dry.
2.
Inspect parts for cracks, wear, distortion, or damage.
d.
ASSEMBLY
1.
Assemble individual spring leaves (11), and install bolt
(12) and nut (9).
2.
Install two alinement clips (8) with two nuts (10), spacers (13), and screws (14).
3.
Install two alinement clips (7) to springs (3).
5-54
