TM 9-2330-357-14&P
5-12. OUTRIGGER DRIVE MOTOR THERMAL SWITCH REPLACEMENT (Con't).
NOTE
Ensure that brush spring Is over end of brush for proper seating and contact.
4.
Push four brushes (10) into brush holders.
5.
Install new lacing wire (7) through four brush
hold-down screws (8).
6.
Aline marks made during removal and install
end bell (9) on outrigger drive motor housing
(2) with two washers (5) and screws (6).
7.
Apply sealing compound to gasket sealing
surfaces of rear cover (4) and outrigger drive
motor housing (2).
8.
Install new gasket (3) and rear cover (4) on
outrigger drive motor housing (2) with eight
bolts (1). Torque bolts to 18-22 lb.-in. (2.0-2.5
N ).
m
FOLLOW-ON TASKS:
5-52