TM9-2330-358-14$P
(3) Remove two screws (3) and mounting disk (4).
(4) Tag and disconnect wiring from semitrailer wiring and remove connector (2).
b.
Removal (M871A1).
(1) Pry clearance light (1, fig. 4-13) from grommet (2).
(2) Pull connectors (3) apart.
(3) Remove grommet (2) from frame (4).
Figure 4-13.
Clearance Light
Clearance Light
Figure 4-12.
(M871Al)
(M871)
c.
Installation (M871).
(1) Connect connector wiring (2, fig. 4-12) to semitrailer wiring.
(2) Install mounting disk (4) and two screws (3).
(3) Install connector (2) to rear of light (l).
(4) Rotate light (1) one-quarter turn clockwise.
(5) Connect electrical power and test for proper operation.
Installation (M871A1).
d.
(1) Install grommet (2, fig. 4-13) in frame (4).
(2) Connect cable connectors (3).
4-35
