TM9-2330-368-1 4 & P
2-16. DISCONNECTING HEMAT FROM TOW-
ING VEHICLE (cont)
f . Pull free-fall plunger (11 ) so shoe (12)
drops to ground.
g . Crank landing gear leg (13) down, using
crank (14), until coupler (lunette) is
centered in towing vehicle pintle and land-
ing gear is supporting weight of HEMAT.
h. Disconnect intervehicular cable and stow in
storage box.
i. Disconnect intervehicular air hoses (15)
and install dummy coupling (16).
j. Install intervehicular air hoses (15) on
gladhand dummy couplings (17).
k. Disconnect safety chains (18) from towing
vehicle and hook safety chain on the
coupler plate.
l. Remove cotter pin from towing vehicle
pintle ( 19). Open towing vehicle pintle.
WARNING
Crank landing gear leg until coupler clears
towing pintle to prevent injury to
personnel.
m. Drive towing vehicle forward to clear
HEM AT.
2-22
