TM9-2330-368-14 & P
3-6. WHEELS AND TIRES (cont)
c. Installation of Wheels and Tires.
(1) Place spare wheel and tire (6) over
wheel lugs and install the wheel nuts
(5). Tighten wheel nuts using the lug
wrench.
NOTE
Right wheel nuts are turned clock-
wise to tighten and left wheel nuts
are turned counterclockwise to
tighten.
(2) Lower jack (3) until tire is on ground.
Remove jack.
CAUTION
Failure to tighten wheel nuts may
result in fatigue rupture of the
wheel studs.
(3) Retighten wheel nuts using lug wrench
and breaker bar.
(4) Pull HEMAT forward off tire changing
block ( 1 ).
(5) Remove tire changing block ( 1). Stow
block and lug wrench in tool box.
(6) Notify organizational maintenance of
tire change so wheel nuts may be
torqued to 450-5001b-ft (610-678 Nm)
and tire repaired.
3-11/(3-12 Blank)