TM9-2330-368-14 & P
NOTE
3-6. WHEELS AND TIRES
Right wheel nuts are turned
counterclockwise to loosen and
Materials/Tools
left wheel nuts are turned clock-
Lug wrench (in tool box)
wise to loosen.
Tire changing block (in tool box)
(2) Place tire changing block (1) in front
Breaker bar
of good tire (2).
Prime mover jack
(3) Pull HEMAT forward so tire is up on
a. General. Maintenance of the wheels and
tires is limited to exchanging a defective wheel and
block.
tire with a serviceable wheel and tire. Refer to
(4) Place jack (3) underneath equalizer
paragraph 2- I 8 for operation of the spare tire
hanger and socket (4).
carrier.
b. Removal of Wheels and Tires.
(5) Jack up equalizer hanger, making sure
jack head enters socket (4).
( 1 ) Using lug wrench and breaker bar from
tool box, loosen wheel nuts on the
(6) Remove wheel nuts (5). Remove wheel
wheel but do not remove.
and tire (6).
3-10
