TM9-2330-368-14 & P
(g) Remove lock ring (1) and slack ad-
4-15. SERVICE BRAKES (cont)
(h) Remove lock ring (4) using lock
ring pliers. Withdraw camshaft (3)
(1) Removal.
part way and remove washer (5).
(a) Chock wheels.
(i) Remove three hex nuts (6), lock
washers (7) and screws (8) to re-
move bearing assembly (9).
a).
(j) Remove grease fitting (10).
(c) Drain air tanks.
(k) Separate brackets (11 and 12) and
(d) Remove wheels and tires (para.
remove bearing (13).
3-6).
(l) Remove seals (14) from brackets
(e) Remove hubs and drum (para. 4-
and discard seals.
14a, steps 1 through 4).
(m) Remove grease fitting (15).
(1)).
(n) Remove seals (16) and bushing
(17) from axle spider (18). Discard
seals.
(o) Remove six self-tapping screws
(20) and dust shield (21) from
axle.