TM9-2330-368-14 & P
(4) Unwind cable (7) from shaft (8). Pull
4-28. SPARE TIRE CARRIER
cable from two holes (9) in shaft.
Materials/Tools
NOTE
Dry cleaning solvent (item 3, app E)
Main member (10) is welded to
Wiping rag (item 10, app E)
frame and cannot be removed.
General mechanics tool kit
Torque wrench, 3/8 inch drive, 0-150 lb-ft.
(5) Remove cotter pin (11) and two flat
Socket, 1/2 inch, 3/8 inch drive
washers (12). Withdraw shaft (8) from
main member (10), and pawl plate (13).
a. Removal.
(6) Remove three lock nuts (14) and cap
(1) Remove spare tire (para. 2-18a).
screws (15) to detach paw] plate (13)
from main member.
(2) Place wheel nuts (1) on studs (2).
(3) Remove nuts (3), lock washers (4) and
clamps (5). Remove pickup member
(6).
4-48
