TM 9-2330-371-14&P
OPERATOR TROUBLESHOOTING - CONTINUED
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
6. LANDING GEAR IS DIFFICULT TO LOWER OR RAISE - CONTINUED
If crank handle is misalined or broken, notify organizational
maintenance.
Check for dirt on lower landing gear leg.
Step 2.
If lower landing gear leg is dirty, clean landing gear leg.
Check for misalined, damaged, or bent landing gear legs.
Step 3.
TIRES
7. EXCESSIVELY WORN, SCUFFED, OR CUPPED TIRES.
Step 1.
Check tire pressure.
If tire pressure is not 60 psi, inflate tires to 60 psi.
If tire pressure is 60 psi, go to step 2.
Step 2.
Check for loose, cracked or broken wheels.
If wheels are loose, tighten nuts.
If wheel is cracked or broken, notify Organizational Maintenance.
If wheel is secure and not cracked or broken, go to step 3.
Step 3.
C h e c k suspension system for damaged springs and loose or missing bolts
and nuts.
If suspension is damaged or has loose or missing bolts and nuts,
notify Organizational Maintenance.
I f suspension system is not damaged and all hardware is complete and
secure, go to step 4.
Step 4.
Check tracking for indication of axle misalinement.
If axle appears to be misalined, notify Organizational Maintenance.
If the above steps do not correct the malfunction, notify
Organizational Maintenance.
Section Ill. OPERATOR MAINTENANCE PROCEDURES
Page
Page
Landing Gear Legs, . . . . . . . . . . . . . . . . . .
Air Reservoir . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9
Electrical Connectors . . . . . . . . . . . . . . . . . . . . . . . 3 - 7
Spare Tire and Wheel Assembly . . . . . .
Tire and Wheel Assembly . . . . . . . . . . . . .
Gladhands . . . . . . . . . .. . . . . . . . . . . . . . . . . . . 3 - 8
3-6 Change 1