TM 9-2330-371-14&P
TIRE AND WHEEL ASSEMBLY - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
REMOVAL-CONTINUED
NOTE
Check lug nut (1) stamping to determine direction of
rotation for removal before starting to loosen lug
nuts (1).
10 lug nuts (1)
Using lug wrench, loosen until free, but
Outer tire and
2.
do not remove.
wheel assembly (2)
Hydraulic jack (4)
a. Place under axle (3) inboard of torque
End of axle (3)
3.
rod (5).
holding tire
b. Raise tire and wheel assemblies (2) and
being removed
(6) until clear of ground.
10 lug nuts (1)
Unscrew and take out.
Stud nuts (7)
4.
Outer tire and wheel
With the aid of an assistant, take
5.
assembly (2)
off of stud nuts (7).
NOTE
If inner tire and wheel assembly does not need to be
removed, skip steps 6 thru 9.
10 stud nuts (7)
a. Lower axle (3) until tire and wheel
Inner tire and
6.
wheel assembly (6)
assembly (6) touches ground.
b. Using stud-nut wrench, loosen until
free, but do not remove.
c. Raise axle (3) until tire and wheel
assembly (6) is free from ground.
d. Unscrew and take off stud nuts (7).
Inner tire and
With aid of an assistant, take off of
Lug bolts (8)
7.
wheel assembly (6)
lug bolts (8).
INSTALLATION
Inner tire and
With the aid of an assistant,
8.
wheel assembly (6)
place on lug bolts (8).