TM 9-2330-371-14&P
WIRE HARNESS - CONTINUED
ACTION
REMARKS
ITEM
LOCATION
INSTALLATION CONTINUED
Pull over main beam (2) to clearance
Wire harness (3)
Back of left
62.
lights (1) and allow enough slack for
front clearance
both connections.
lights (1) and
Short harness lead goes to left side.
main beam (2)
Put on wire harness (3) and clearance
Clamp (4)
63.
light bolt (5).
Put on and tighten using 3/8-inch socket
Lockwasher (6) and
Clearance light
64.
and handle.
nut (7)
bolt (5)
Four connector
Match wire markers and push together.
Left front clear.
65.
Repeat steps 62,63,64, and 65 for
halves (8)
ante lights (1)
right front clearance lights.
and wire
harness (3)
Put on.
12 clamps (10)
Wire harness (3)
66.
and twelve studs
(9)
Put on and tighten using 7/16-inch socket
Twelve Iockwashers
Twelve studs (9)
67.
and handle.
(11) and nuts (12)
and twelve harness
clamps (10)
4-50