TM 9-2330-371-14&P
WIRE HARNESS - CONTINUED
ACTION
ITEM
LOCATION
REMARKS
REMOVAL CONTINUED
Rear of wire
Rear of left and
27.
Feed through holes and pull out.
harness (15)
right main beams
(12) and (13)
and grommet hole
at axle cross
beam (14)
Front and center
Left and right
Pull to between main beams (12) and (13).
28.
clearance light
main beams (12)
harness (16)
and (13)
and (17)
Front of wire
Grommet holes (18)
a. Feed through holes, toward rear of
29.
harness (15)
trailer.
b. If unsplit grommets (19) are still on
harness, slide off as harness is
removed.
Wire harness (15)
Take out.
30.
Wire harness (15)
Antichafing
Using tape measure note location for appli-
31.
cover (20)
cation to new harness.
4-45
