TM 9-2330-371-14&P
WIRE HARNESS - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
INSTALLATION CONTINUED
Wire harness (3)
Feed through until slack is gone.
Grommet hole (10)
37.
in front bogie
crossmember (11)
Grommet (12)
Put on harness and push into place.
Wire harness (3)
38.
Put on at front end of antichafing
Wire harness (3)
Clamp (14)
39.
material.
and stud (13)
Nut (15) and
Put on and tighten using 7/16-inch socket
Stud (13) and
40.
lockwasher (16)
and handle.
harness clamp (14)
Feed front of harness forward (17) over
Wire harness (3)
Two main beams
41.
five main frame crossmembers until slack
(1) and (2)
is gone and push to left main frame (1).
Grommet (18)
Put on.
Front of wire
42.
harness (3)
Wire harness (3)
Feed through until slack is gone.
Grommet hole (19)
43.
in front cross-
member (20)
Grommet (18)
Push into place.
44.
4-47
