TM 9-2330-371-14&P
WIRE CONNECTOR - CONTINUED
ACTION
REMARKS
ITEM
LOCATION
MALE CONNECTOR REPAIR CONTINUED
NOTE
If replacing only shell (3), skip steps 5, 6a, and 6c.
Cut off lead (1) using cutting pliers.
Contact (2)
Wire lead (1)
5.
Be sure enough wire remains to make
connection after repair. Discard
contact (2).
Using wire stripper, strip insulation
a.
Wire lead (1),
6.
at end equal to depth of new
new contact (2),
contact (2).
and new shell (3)
Slide on new shell, and apply
b.
insulating compound to wire lead (1).
Slide end into new contact (2) and
c.
crimp using crimping tool.
Place on lead (1) at contact (2).
Retaining
7.
washer (4)
Slide down wire lead (1) until washer
Shell (3)
8.
(3) seats.
Connector halves
Apply compound to outside of female con-
9.
(5 and 6)
nector half (6) and push together until seated.
Apply power, turn on, and check operation
Semitrailer lights
10.
4-60
