TM9-2330-371-14&P
WIRE CONNECTOR - CONTINUED
ACTION
ITEM
LOCATION
REMARKS
CIRCUIT MARKER BAND REPLACEMENT
Marker band (2)
Wire lead (1)
20.
Using flat-tip screwdriver, open tab ends
(3) and take off.
Note number on band (2) and discard
band (2).
New marker band (2)
21.
a. Using electric etcher, etch proper number.
See schematic on page FO-1.
b. Place on wire lead (1) and bend tab
ends (3) over wire using crimping tool.
TASK ENDS HERE
