TM 9-2330-371-14&P
HYDRAULIC TUBES AND FITTINGS - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
REMOVAL CONTINUED
Using 5/8-inch wrench and 1/2-inch
Swivel connector (3)
T-fitting (1) and
1.
wrench, unscrew and take out.
hose (2)
If replacing T- fitting only, go to
step 3.
Hose (2)
Using 5/8-inch wrench, unscrew and take
Master
2.
out.
cylinder (4)
If replacing hose only, go to
step 21.
Right tube
Using 7/16-inch wrench, unscrew and take
T-fitting (1)
3.
fitting (5)
out.
If replacing T-fitting only, go to
step 8.
Nut (8) and
Using 9/16-inch wrench, unscrew and take
Axle (6) and
4.
off.
Iockwasher (9)
stud (7)
Using 7/16-inch wrench, unscrew and take
Two nuts (11) and
Axle (6) and two
5.
off.
Iockwashers (12)
studs (10)
Spread and take off.
Three tube
Right tube (13)
6.
clamps (14)
Tube (13) and
Using 7/16-inch wrench, unscrew and take
Right connecting
7.
fitting (16)
out. Take out tube.
fitting (15)
If replacing right hydraulic tube
only, go to step 16.
Using 7/16-inch wrench, unscrew and take
Left tube
T-fitting (1)
8.
fitting (17)
out.
If replacing T-fitting only, go to
step 15.
Using 7/16-inch wrench, unscrew and take
Two nuts (19) and
Axle (6) and two
9.
off.
Iockwashers (20)
studs (18)
Two tube clamps (22)
Spread and take off.
Left tube (21)
10.
Tube (21) and
Using 7/16-inch wrench, unscrew and take
Left connecting
11.
out. Take out tube.
fitting (24)
fitting (23)
4-80