TM 9-2330-371-14&P
WHEEL CYLINDER
This task covers:
INITIAL SETUP
Tools
Personnel Required
Extension, 5-inch
One
Socket, 9/16-inch, 3/8-inch drive
Equipment Condition
Wrench, 7/16-inch, open-end
Wrench, 3/4-inch, open-end
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
Back of backing
1.
Fluid passage bolt
Using 3/4-inch wrench, unscrew and take
plate (1) and
(3) and two flat
out.
connecting
washers (4)
fitting (2)
Back of backing
2.
Two bolts (5) and
Using 9/16-inch socket, extension, and
plate (1)
Iockwashers (6)
handle, unscrew and take out.
Front of backing
3.
Wheel cylinder (7)
Take out.
plate (1)
and shield (8)
Wheel cylinder (7)
Bleed screw (9)
4.
Using 7/16-inch wrench, unscrew and take
out.