TM 9-2330-371-14&P
WHEEL CYLINDER - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
INSTALLATION
Bleed screw (2)
Put in and tighten using 7/16-inch wrench.
Wheel cylinder (1)
5.
Wheel cylinder (1)
Place in position.
Front of backing
6.
and shield (4)
plate (3)
Two bolts (5) and
Screw in and tighten using 9/16-inch
7.
Back of backing
Iockwashers (6)
socket, extension and handle.
plate (3) and
wheel cylinder (1)
Connecting fitting
a. Put in position and line up holes.
8.
(7), fluid passage
b. Screw in and tighten using
bolt (8), and two
3/4-inch wrench.
flat washers (9)
NOTE
FOLLOW-ON MAINTENANCE:
1.
Fill and bleed brake system (page 4-70).
2.
Install brakeshoes (page 4-66).
3.
Adjust brakes (page 4-63).
4.
Test brakes (page 2-18).
TASK ENDS HERE
