TM9-2330-374-14&P
GENERAL INSPECTION INSTRUCTIONS
Inspect for loose, missing or damaged parts.
a.
Inspect wiring for damaged, deteriorated insulation and broken or frayed
b.
conductor, if applicable.
Inspect parts for dents, holes, worn spots, scratches, marred finish, cracks,
c.
rust and corrosion.
SERVICE UPON RECEIPT OF MATERIEL
Section II.
Page
S e r v i c i n g the Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 2
U n p a c k i n g and Checking the Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 2
UNPACKING AND CHECKING THE EQUIPMENR
a . R e m o v e a n y m e t a l s t r a p p i n g , p l y w o o d , t a p e s , s e a l s , wrapping paper or any
other shipping and protective items.
WARNING
D r y cleaning solvent (PD-680) is both toxic and
flammable.
Avoid prolonged breathing of vapors. Avoid
skin contact. Use only in a well ventilated area.
Keep away from open flame.
Flash point of solvent is
1 3 8 F (59C).
If any exterior parts are coated with rust preventive compound, remove it
b.
--
with cleaning solvent (PD-680).
c.
R e a d and follow all instructions contained in DD Form 1397, which is attached
to a conspicuous part of the semitrailer.
Inspect equipment for damage incurred during shipping.
d.
I f equipment has been
damaged, report the damage on DD Form 6, P a c k i n g Improvement Report.
e . C h e c k the equipment against the packing slip to see if the shipment is
complete.
R e p o r t all discrepancies in accordance with DA Pam 738-750.
4-7.
SERVICING THE EQUIPMENT
a . Perform the preventive maintenance checks and services contained in tables 2-1
and 4-1.
b . Lubricate all points as shown in the lubrication chart (figure 3-1),
regardless of interval.
S c h e d u l e the next preventive maintenance checks and services on DD Form 314,
c.
P r e v e n t i v e Maintenance Schedule and Record.
